Aluminium Skirting Board Profiles
AQUA
Adhesive fixing · Slim wall transition
A slim aluminium skirting section for bathroom and other interior wall-to-floor details. It bonds directly to the wall using a compatible silicone adhesive and is listed in 60 mm and 100 mm heights.
- 60 mm height
- 100 mm height

Technical reference
Dimensions & specification
- Material
- Aluminium; the technical datasheet lists EN AW 6463 T6 and EN AW 6061 T6. Confirm the alloy for the ordered section.
- Section variants
- 60 mm height; 100 mm height
- Length
- 2,500 / 2,700 mm — conflicting references; confirm before ordering
- Published mass
- 0.296 kg/m (variant not identified)
- Published section perimeter
- 132 mm (variant not identified)

Surface options
Finishes for AQUA
The following finishes are listed in the product reference. Confirm the current finish, matching accessories and physical sample with your quotation. Illustrated finishes are not calibrated colour measurements.
Explore the interactive material studioResolve the detail
Installation
- Apply two lines of suitable silicone adhesive to the rear and press against the prepared wall. The guide shows temporary tape at 500 mm intervals, removed the following day; follow the adhesive cure requirements.
- Mitre both sections at 45° for internal and external corners. Coordinate all joints with the required waterproofing detail.
Components & accessories
- Compatible silicone adhesive and temporary fixing tape (project-specified)
Confirm the component schedule, quantities and supply scope with your quotation. Site conditions and the complete assembly determine suitability.
Project resources
Technical downloads
English reference compiled from the product documentation, including unresolved specification differences. Confirm the final production specification before ordering.
Your project. The right detail.
Specify AQUA.
Share your quantity, preferred finish, corner schedule and installation detail.
Request a AQUA quotation


