LED Skirting Board Profiles

AURON LED

Slim face · Upper and lower illumination

A flat-faced aluminium LED skirting system with independent upper and lower light channels. Its 100 mm face creates a restrained wall-to-floor detail, with surface-mounted or flush integration into a coordinated wall build-up.

  • 100 × 13 mm (height × projection)
Request a quoteDiscuss AURON LED on WhatsApp ↗

Technical reference

Dimensions & specification

Material
Aluminium; the technical datasheet lists EN AW 6463 T6 and EN AW 6061 T6. Confirm the alloy for the ordered section.
Section variants
100 × 13 mm (height × projection)
Length
2,500 / 2,700 mm — conflicting references; confirm before ordering
Published mass
0.846 kg/m
Published section perimeter
529 mm

Lighting integration

Designed for LED strip and driver integration. Strip width, voltage, power, IP rating and supplied electrical components are not specified; confirm the complete lighting assembly before ordering.

The technical documentation identifies transparent PVC diffuser strip. Exact diffuser and LED compatibility must be confirmed for the selected assembly.

AURON LED original technical cross-section drawing
Original section drawing. Dimensions in millimetres; not to scale. Read alongside the listed variants and specification notes.
Download section drawing ↓

Plan the profile and lighting system together

AURON LED, REGENT LED and VIREO LED are aluminium profiles designed for LED integration. The configuration below is project guidance, not a declaration of supplied components, electrical ratings or certification for these models.

Bare aluminium profile

A non-electrical profile for integration into a lighting design. Confirm the profile, diffuser and fixing scope; do not assign voltage, lumen output or an IP rating to the bare extrusion.

Profile with selected components

Specify the LED strip, diffuser, driver and controls individually. Confirm dimensional fit, heat dissipation and electrical compatibility before combining them.

Complete assembled lighting product

Agree the complete assembly and responsible manufacturer. Electrical ratings, instructions, testing and applicable conformity documentation must relate to that actual assembly.

Project-selectable configurations

Light and colour
Possible design targets include 2700K or 3000K warm white, 4000K neutral white and high colour rendering such as CRI Ra ≥90. Confirm the selected LED component and approve the lighting effect.
Power and control
A 24V DC constant-voltage LED system is one possible configuration. Select strip power in W/m, total run length, voltage drop and driver capacity together. Use a compatible constant-voltage driver where required by the strip; agree a compatible dimming system.
Integration and access
Check strip and diffuser fit without assuming a model-specific strip width. Assess operating temperatures and heat dissipation in the installed assembly. Keep drivers, connections and replaceable components accessible for maintenance.
Installation environment
Specify project-specific IP protection for the complete assembly, including joints and connections. A strip or driver IP rating does not automatically establish the rating of the installed lighting system.
European technical framework

IEC 60598-1 concerns luminaire safety; IEC 62031 concerns LED-module safety; IEC 61347-1 and IEC 61347-2-13 concern controlgear safety. IEC 60529 defines enclosure IP classification. The applicable EN edition, relevant particular standards and product classification must be confirmed for the selected assembly.

EU Regulation 2019/2020 addresses ecodesign for in-scope light sources and separate controlgear; EU Regulation 2019/2015 addresses light-source energy labelling. A bare aluminium profile is not itself a light source. Assess containing-product obligations for an assembled system.

Assess the Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU and RoHS Directive 2011/65/EU according to the supplied electrical product. A 24V DC circuit is below the LVD voltage range, but its mains-powered driver may be in scope; this does not remove other applicable safety obligations.

CE marking is a manufacturer's declaration under applicable legislation, not a general quality certificate. These references do not certify FIRST METAL models. Confirm the final bill of materials, current applicable EN standards and supporting documentation before specifying a complete lighting product.

Technical references and scope

Surface options

Finishes for AURON LED

The following finishes are listed in the product reference. Confirm the current finish, matching accessories and physical sample with your quotation. Illustrated finishes are not calibrated colour measurements.

AURON LED: Matt silver anodised surface reference
Matt silver anodised
AURON LED: RAL 9016 white · semi-gloss powder coat surface reference
RAL 9016 white · semi-gloss powder coat
AURON LED: RAL 7016 anthracite · semi-gloss powder coat surface reference
RAL 7016 anthracite · semi-gloss powder coat
AURON LED: RAL 9005 black · semi-gloss powder coat surface reference
RAL 9005 black · semi-gloss powder coat
Explore the interactive material studio

Resolve the detail

Installation

  1. Fix the rear carrier to the wall and install the specified LED strips and driver before fitting the front cover and diffusers.
  2. Upper and lower light channels can be used independently or together. For a flush installation, coordinate the wall finish over the profile.
  3. The installation guide also permits a suitable silicone adhesive depending on the substrate. Confirm the fixing method and corner treatment for the project.

Components & accessories

  • Wall fixing brackets
  • Internal and external corner pieces
  • End caps
  • Upper and lower diffusers
  • Lower PVC gasket

Confirm the component schedule, quantities and supply scope with your quotation. Site conditions and the complete assembly determine suitability.

Project resources

Technical downloads

English reference compiled from the product documentation, including unresolved specification differences. Confirm the final production specification before ordering.

English technical reference · PDFOriginal section drawing · PNG

Your project. The right detail.

Specify AURON LED.

Share your quantity, preferred finish, corner schedule and installation detail.

Request a AURON LED quotation
WhatsApp