LED Skirting Board Profiles
REGENT LED
Classical contour · Upper and lower illumination
A contoured aluminium LED skirting system combining a classical moulded face with integrated linear light. The 100 mm section offers upper and lower illumination and can be coordinated with surface-mounted or flush wall detailing.
- 100 × 20 mm (height × projection)

Technical reference
Dimensions & specification
- Material
- Aluminium; the technical datasheet lists EN AW 6463 T6 and EN AW 6061 T6. Confirm the alloy for the ordered section.
- Section variants
- 100 × 20 mm (height × projection)
- Length
- 2,500 mm
- Published mass
- 0.906 kg/m
- Published section perimeter
- 561 mm
Lighting integration
Designed for LED strip and driver integration. Strip width, voltage, power, IP rating and supplied electrical components are not specified; confirm the complete lighting assembly before ordering.
The technical documentation identifies transparent PVC diffuser strip. Exact diffuser and LED compatibility must be confirmed for the selected assembly.

Plan the profile and lighting system together
AURON LED, REGENT LED and VIREO LED are aluminium profiles designed for LED integration. The configuration below is project guidance, not a declaration of supplied components, electrical ratings or certification for these models.
Bare aluminium profile
A non-electrical profile for integration into a lighting design. Confirm the profile, diffuser and fixing scope; do not assign voltage, lumen output or an IP rating to the bare extrusion.
Profile with selected components
Specify the LED strip, diffuser, driver and controls individually. Confirm dimensional fit, heat dissipation and electrical compatibility before combining them.
Complete assembled lighting product
Agree the complete assembly and responsible manufacturer. Electrical ratings, instructions, testing and applicable conformity documentation must relate to that actual assembly.
Project-selectable configurations
European technical framework
IEC 60598-1 concerns luminaire safety; IEC 62031 concerns LED-module safety; IEC 61347-1 and IEC 61347-2-13 concern controlgear safety. IEC 60529 defines enclosure IP classification. The applicable EN edition, relevant particular standards and product classification must be confirmed for the selected assembly.
EU Regulation 2019/2020 addresses ecodesign for in-scope light sources and separate controlgear; EU Regulation 2019/2015 addresses light-source energy labelling. A bare aluminium profile is not itself a light source. Assess containing-product obligations for an assembled system.
Assess the Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU and RoHS Directive 2011/65/EU according to the supplied electrical product. A 24V DC circuit is below the LVD voltage range, but its mains-powered driver may be in scope; this does not remove other applicable safety obligations.
CE marking is a manufacturer's declaration under applicable legislation, not a general quality certificate. These references do not certify FIRST METAL models. Confirm the final bill of materials, current applicable EN standards and supporting documentation before specifying a complete lighting product.
Surface options
Finishes for REGENT LED
The following finishes are listed in the product reference. Confirm the current finish, matching accessories and physical sample with your quotation. Illustrated finishes are not calibrated colour measurements.
Explore the interactive material studioResolve the detail
Installation
- Fix the rear carrier to the wall and install the specified LED strips and driver before fitting the front cover and diffusers.
- Upper and lower light channels can be used independently or together. For a flush installation, coordinate the wall finish over the profile.
- The installation guide also permits a suitable silicone adhesive depending on the substrate. Confirm the fixing method and corner treatment for the project.
Components & accessories
- Wall fixing brackets
- Internal and external corner pieces
- End caps
- Upper and lower diffusers
- Lower PVC gasket
Confirm the component schedule, quantities and supply scope with your quotation. Site conditions and the complete assembly determine suitability.

Project resources
Technical downloads
English reference compiled from the product documentation, including unresolved specification differences. Confirm the final production specification before ordering.
Your project. The right detail.
Specify REGENT LED.
Share your quantity, preferred finish, corner schedule and installation detail.
Request a REGENT LED quotation
